News

How USMCA Apparel Rules of Origin Decide Which Garments Enter Duty-Free

Apparel moving among the United States, Mexico and Canada enters duty-free when it meets USMCA origin tests. Here is how yarn, fabric and assembly rules work.

By Theo Laurent · November 20, 2026 · 6 min read
How USMCA Apparel Rules of Origin Decide Which Garments Enter Duty-Free

Apparel shipped between the United States, Mexico and Canada can enter without the regular duty if it meets the rules of origin in the USMCA and in the U.S. regulation that carries them out. Those rules set which fibres, yarns and fabrics count toward origin, and which production steps must happen inside the region.

The rules are written by tariff heading, so the test that applies depends on what the garment is. Knitwear, underwear and assembled goods each have their own entries in the regulation, and the agreement adds exceptions for certain goods and for quota-based access.

Where the Agreement Stands After the July 1, 2026 Review

On July 1, 2026, the three parties held the sixth-anniversary joint review of the agreement. According to a Congressional Research Service report, Canada and Mexico affirmed their support for renewal. The United States did not agree to renew the agreement in its current form, according to a statement issued that day by USTR Ambassador Jamieson Greer.

The United States said it would keep engaging with Canada and Mexico on shortcomings in the agreement and on U.S. trade deficits with both countries. The statement says the USMCA remains in force until those issues are resolved or the agreement is terminated.

The agreement remains in force. According to a Congressional Research Service report updated September 29, 2026, it is scheduled to terminate on July 1, 2036, 16 years after it took effect, unless the parties extend it. Because the United States did not agree to an extension, the parties must hold annual joint reviews until all three agree to extend or the agreement ends. The report says no date or format has been announced for the first annual review.

Had all three parties agreed to extend at the six-year review, the agreement would have been extended for 16 years, with the next review due by July 1, 2032, according to the same report.

Any party may withdraw from the agreement with six months’ written notice to the other parties, according to the same report. Greer’s statement said the United States and Mexico would hold a third round of bilateral talks during the week of July 20, 2026.

The report says the U.S. and Mexico are continuing bilateral negotiation rounds, and that the United States and Canada have not announced official negotiations related to the review. Before each joint review, the President must consult the House Ways and Means and Senate Finance Committees. USTR briefed both committees in December 2025.

The 10 Percent Allowance
Trade.gov says up to 10 percent of the weight of the fibres and yarns in the component that determines origin may be non-originating, and, of that 10 percent, up to 7 percent of the weight may be elastomeric fibres and yarns.

The Base Rule: Yarn Forward for Apparel

Trade.gov’s summary of the USMCA textile chapter describes the general rule for apparel as yarn-forward. The yarn and every later step must come from inside the region, while the fibre itself can come from anywhere.

In practice, this means spinning, fabric formation and garment assembly all have to take place in the region for the base rule to apply. A brand that buys fibre from outside North America can still qualify, as long as the yarn is made and the garment is produced inside the region.

The rule has exceptions. Trade.gov says man-made fibre sweaters of heading 6110.30 traded between Mexico and the United States follow a fibre-forward rule instead.

Cut-and-Sew Goods, U.S.-Fabric Assembly and Quota Access

The cut-and-sew exception, which trade.gov describes as a single transformation, lets the fibre, yarn and fabric come from anywhere. Cutting and assembly must take place in a USMCA country. The list covers woven apparel made from fabric defined in Note 1 to Chapter 62, men’s and boys’ woven dress shirts in headings 6205.20 and 6205.30, and woven cotton boxer shorts in heading 6207.11.

The same exception covers nightwear and underwear in headings 6107 and 6108 made from fine-count cotton knit fabric, brassieres, and silk and linen apparel. Trade.gov lists these as separate items.

Trade.gov also lists dates for certain component rules in the chapter. Narrow elastic fabric must originate 18 months after entry into force, sewing thread 12 months after, and pocket bag fabric 18 months after. Apparel of blue denim fabric has a 30-month date.

Apparel assembled in Mexico under U.S. tariff provision 9802.00.91 from U.S. fabric can enter the United States duty-free. The yarn may come from outside the region. Every fabric component, apart from a visible lining, must be wholly formed and cut in the United States.

Two further exceptions involve access limits. Short-supply changes need agreement among all three parties, plus domestic procedures in each country. Trade.gov says short-supply determinations must be trilateral, which it contrasts with the earlier NAFTA approach. Tariff preference levels allow duty-free entry for set quantities, and shipments above those quantities pay the regular duty. Trade.gov lists 40 million square-metre equivalents of cotton and man-made fibre apparel from Canada and 45 million from Mexico. It lists 4 million from Canada and 1.5 million from Mexico for wool apparel, and 6 million kilograms of yarn from Canada and 700,000 kilograms from Mexico.

The same preference system applies to U.S. exports. Trade.gov lists 20 million square-metre equivalents of cotton and man-made fibre apparel to Canada and 12 million to Mexico. For wool apparel, it lists 700,000 to Canada and 1 million to Mexico, and for yarn, 1 million kilograms to Canada and 950,000 kilograms to Mexico.

The yarn and every later step must come from inside the region, while the fibre itself can come from anywhere.

The 10 Percent Allowance and Fibre-Forward Yarn Rules

Trade.gov states that up to 10 percent of the weight of the fibres and yarns in the component that determines a fabric’s or garment’s origin may be non-originating. Of that 10 percent, up to 7 percent of the weight may be elastomeric fibres and yarns.

The allowance is measured by weight, so the elastomeric share sits inside the 10 percent rather than on top of it.

Spun yarn follows a fibre-forward rule. Rayon, silk and linen can be sourced from anywhere. Filament yarn must be formed or extruded in a USMCA country, though its petrochemical or cellulosic feedstock may come from outside the region.

How the U.S. Regulation Runs the Origin Test

The U.S. regulation at 19 CFR 102.21 applies the origin tests in a fixed order, according to the text on the Cornell Legal Information Institute site. The first test asks whether the good was wholly obtained or produced in one country. If not, the next tests look at foreign materials, knit-to-shape goods, wholly assembled goods, and the most important manufacturing process. The sequence ends with the last important assembly or manufacturing process in a single country.

The apparel paragraph, paragraph (e), sets separate entries for headings 6101 to 6117. For goods that are not knit to shape and have two or more component parts, origin is where the good was assembled from unassembled components, provided the whole good was assembled in one country. For knit-to-shape goods, the origin test depends on where the components were knitted, provided they were knitted in one country.

The regulation defines a good as wholly assembled when at least two components that existed in essentially the same condition as in the finished good are combined in one country. Minor attachments, minor embellishments and minor subassemblies do not affect that status.

Headings 6213 and 6214 are treated differently. Under the regulation, their origin is generally the country where the fabric was formed. A good counts as knit to shape when 50 percent or more of its exterior surface area is formed by major parts knitted or crocheted to shape. Certain goods in these headings fall under a separate paragraph (e)(2) rule, which excludes goods classified as cotton or wool, or blends with 16 percent or more cotton by weight. Under that rule, origin is where the fabric was dyed and printed with two or more listed finishing operations, and where that does not apply, where the fabric was formed.

Continue reading

More from the Edit